How can I reset my series 5000 card settings? : Technical Support

Knowledge base

Welcome to LYNX Technik AG Technical Support. Below you will find our Knowledge Base. You can either browse for an article by reviewing the topic headings, or you can search the Knowledge Base by entering a search term (for example “PVD 5840 AV Delay”….). If you are a registered user and currently logged into the system then you can also search your support tickets in the same way. If the Knowledge Base does not provide the answers you require, then please open a new ticket to submit your specific questions.

How can I reset my series 5000 card settings? Print

Modified on: Wed, 5 Nov, 2025 at 3:13 PM

You can reset the settings of your series 5000 cards in the LynxCentraal GUI. Just right-click on the related device and choose "Reset Factory Defaults".

https://lynx-technik.com/software-applications/

If you have a RCT5023 controller, you can also use the small hardware reset button located on the device front side

above the USB socket. Press and hold the button for at least 5 seconds.

Default IP addresses:

LYNX Controller: 192.168.1.162 ( RCT5023 )

LYNX Server: 192.168.1.160 ( SERVER_5023 )

Did you find it helpful? Yes No

Knowledge base

How can I reset my series 5000 card settings? Print

Related Articles