PDM1383 "Bidirectional master" mode does not output / store the last connected standard : LYNX Technik AG - Technical Support

Knowledge base

Welcome to LYNX Technik AG Technical Support. Below you will find our Knowledge Base. You can either browse for an article by reviewing the topic headings, or you can search the Knowledge Base by entering a search term (for example “PVD 5840 AV Delay”….). If you are a registered user and currently logged into the system then you can also search your support tickets in the same way. If the Knowledge Base does not provide the answers you require, then please open a new ticket to submit your specific questions.

PDM1383 "Bidirectional master" mode does not output / store the last connected standard Print

Modified on: Thu, 11 Dec, 2014 at 2:23 PM

Please note that the modes "Auto Black (if no video)" and "Bidirectional Master" are different.

"Bidirectional Master" always uses a 625 carrier signal for bi-directional audio transmission between the 2 PDM1383 modules.
"Auto Black" always outputs the last connected video standard.

So e.g. if you connect and disconnect a 720p59, you will get a 720p59 output if "Auto Black" is enabled and a 625 output when working in bi-directional mode.

Did you find it helpful? Yes No

Knowledge base

PDM1383 "Bidirectional master" mode does not output / store the last connected standard Print

Related Articles