Support VLAN, IEE 802.1 : LYNX Technik AG - Technical Support

Knowledge base

Welcome to LYNX Technik AG Technical Support. Below you will find our Knowledge Base. You can either browse for an article by reviewing the topic headings, or you can search the Knowledge Base by entering a search term (for example “PVD 5840 AV Delay”….). If you are a registered user and currently logged into the system then you can also search your support tickets in the same way. If the Knowledge Base does not provide the answers you require, then please open a new ticket to submit your specific questions.

OET 15x0 E VLAN / IEE 802.1, IEE 802.1Q support Print

Modified on: Wed, 11 Nov, 2020 at 11:15 AM

The question have frequently been asked by our customers, whether the Ports can be configured or does the device support VLAN, IEE802.1, IEE802.1Q etc. ?

The core of the OET 1510/40 is basically a managed switch, so a lot of features are possible but since yellobrik is a plug and play “keep it simple” device, we did not develop a complex GUI for more complex configurations. The devices Support the latest IEEE 802.1 Audio Video Bridging Standards. It has the Ethernet Port 1 configurable, so both ports can be used as separate VLANs. The configuration is only possible via 3rd party port management tools e.g. Cisco etc

The Switch supports IEE 802.Q aswell , If the customer has tagged IP-packets they will be transferred without any additional configuration.

Since we have no IP-management interface it may be a little difficult to configure (but still possible) the OET 15x0 E, if the user wants to UNTAG or TAG VLANs.

Did you find it helpful? Yes No

Knowledge base

OET 15x0 E VLAN / IEE 802.1, IEE 802.1Q support Print

Related Articles