OET 1514/OBD 1514 and IGMP snooping : Technical Support

Knowledge base

Welcome to LYNX Technik AG Technical Support. Below you will find our Knowledge Base. You can either browse for an article by reviewing the topic headings, or you can search the Knowledge Base by entering a search term (for example “PVD 5840 AV Delay”….). If you are a registered user and currently logged into the system then you can also search your support tickets in the same way. If the Knowledge Base does not provide the answers you require, then please open a new ticket to submit your specific questions.

OET 1514/OBD 1514 and IGMP snooping Print

Modified on: Mon, 9 Feb, 2026 at 11:34 AM

The core of the OET 15x4 / OBD 1514 is basically a managed switch, and support DANTE among many other features /Settings.
Our configuration software LynxCentraal or yelloGUI does not offer port configuration for it being a simple Ethernet to Fiber Transceiver (switch).
IGMP snooping is supported by the CHIP, default = OFF, you will require a 3rd party port management tool for configuration.

Did you find it helpful? Yes No

Knowledge base

OET 1514/OBD 1514 and IGMP snooping Print

Related Articles