Knowledge base

Welcome to LYNX Technik AG Technical Support. Below you will find our Knowledge Base. You can either browse for an article by reviewing the topic headings, or you can search the Knowledge Base by entering a search term (for example “PVD 5840 AV Delay”….). If you are a registered user and currently logged into the system then you can also search your support tickets in the same way. If the Knowledge Base does not provide the answers you require, then please open a new ticket to submit your specific questions.

Solution home APPolo Control System

Network

RemoteControl SNMP User Guide
This document provides an overview and introduction to the SNMP capabilities of the LYNX APPolo Control System. More general information on SNMP can be f...
Wed, 2 Nov, 2016 at 4:27 PM
Application Note 031: How to capture Network traffic with Wireshark
 This Application Note provides a brief introduction to capturing network traffic with the Wireshark software.
Sat, 12 Jul, 2014 at 9:07 PM
Application Note 029: RCT5030 / RCT5031 / SERVER_5023 - is not visible in the connection management
If you are using a LYNX server version lower than 4.9.0 (*) with an APPolo Control GUI 6.2.1 and above, please download the attached application note. ...
Thu, 3 Apr, 2014 at 9:16 AM
Firewall settings for LYNX services - needed ports
LYNX services and related ports: Port 21/TCP: FTP (no anonymous login) used by the "Collect Service Information" Tool of the LynxCentraal/ gr...
Tue, 27 Jun, 2023 at 1:02 PM
How to connect a LYNX controller or greenMachine directly to a PC or notebook via Ethernet
Most of the modern Ethernet devices are supporting auto-negotiation. If not, you need a cross-over Ethernet cable instead of a standard patch ca...
Fri, 14 Feb, 2020 at 10:37 AM